Interior Rearview Mirror

Interior Rearview Mirror

Removing

- Turn off the ignition.

- Loosen the caps - 3 - using (3409).

- Remove the caps - 3 - from the mirror base - 2 -.

- Disconnect the connector for the automatic dimming function - 5 -.

- Loosen the clips - 1 - on both sides with a screwdriver.

- Push the mirror base with the interior rearview mirror - 2 - off the retaining plate - 4 -.






- Remove the lower cable channel - 4 - from the retainer with the retaining plate - 1 -.

- Remove the lower cable channel - 4 - from the roof trim panel - 3 -.

- Disconnect the connector - 5 - from the rain sensor - 6 -.

- Remove the rain sensor - 6 - from the retaining plate - 1 - in - direction of arrow -.

- Remove the upper cable channel - 2 - from the retainer with the retaining plate - 1 -.

- Remove the upper cable channel - 2 - from the roof trim panel - 3 -.

- Remove the trim - 3 - from the roof trim panel. Guide the connector and the wiring harness - 5 - through the trim while doing this.






Installation

- Install in reverse order of removal.