O-rings, Gaskets and Seals

O-rings, Gaskets and Seals






• Replace the O-rings, seals and gaskets.

• Before installing a radial shaft seal, lubricate the sealing lips and the space between - arrow - with sealing grease for seal (G 052 128 A1) and the outer circumference with DSG transmission fluid.

• Use DSG transmission fluid only. Other lubricants can cause malfunctions.

• The open side of the radial shaft seal faces towards the fluid.

• After installing, check the transmission fluid level and fill, if necessary. Refer to => [ Transmission Fluid Level, Checking and Filling ] Transmission Fluid Level, Checking and Filling.