Ride Height Sensor: Service and Repair

Left Rear Level Control System Sensor

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1783)

Removing

- Disconnect the harness connector - 1 -.






- Remove the bolts - 2 - from the lower transverse link.

- Remove bolts - arrows - from the subframe.

- Remove left rear level control system sensor (G76).

Installing

Install in reverse order of removal. Note the following:

The left rear level control system sensor lever must point toward the outside of the vehicle.

- Perform a basic setting on the headlamps after replacing them using the Vehicle Diagnostic Tester.

Tightening Specifications