Wire Stripper VAS 1978/3

Wire Stripper VAS 1978/3

Wire Stripper (VAS 1978/3) is used for professional stripping and cutting of wires.






The (VAS 1978/3) is a component of Wiring Harness Repair Set (VAS 1978) / Wiring Harness Repair Set (VAS 1978A) / Wiring Harness Repair Set (VAS 1978B).

(VAS 1978/3) has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping

- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.

- Insert wire end from front up to stop into jaws of pliers and squeeze the (VAS 1978/3) completely.






- Open the (VAS 1978/3) again and remove the stripped wire end.

- If necessary, cut wires using side-cutter function on the top of the (VAS 1978/3).