Service Test, Performing

Service Test, Performing


Do not check or charge a battery when the visual indicator has no color or is bright yellow. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting.

The battery must be replaced.

- Select "Service Test".

- Select "at the battery terminal" or "at the jump start terminal".

- Select the vehicle model.

- Determine the temperature above the battery. Hold the infrared sensor approximately 5 cm (2 inches) above the battery pole until the temperature is stable.

- Select the battery type (standard, AGM, 2*6 V or gel).

- Select the Standard (CCA, JIS, DIN, SAE, IEC or EN).

- Start the test.

- Print the test log.