Power Door Lock Switch: Service and Repair

Driver Interior Locking Button (E308)


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( Trim Removal Wedge (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

• The Push Button Illumination (L76) is integrated in the driver interior locking button and cannot be replaced separately.

Removing

- Remove the door trim panel.

- Disconnect the connectors.

- Remove the screws - arrows - and remove the cover - 1 - from the door trim panel - 2 -.






- Open the tabs - arrows - and remove the driver interior locking button - 1 - from the door trim panel - 2 -.






Installing

Install in reverse order of removal.