Fog Lamp, Jetta GLI

Fog Lamp, Jetta GLI

• The following illustrations depict removal and installation of left fog lamp.


• Switch off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the front bumper cover.

- Disconnect the connector.






- Remove the bolts - 2 -.

- Move the fog lamp - 1 - slightly and pull it out of the mounts - arrows - in the bumper cover - 3 -.

Installing

Install in reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to => [ Fog Lamp, Jetta GLI Overview ] Fog Lamp, Jetta GLI Overview.

- Check and adjust the fog lamp adjustment.