Tire, Pressing Off

Tire, Pressing Off


• Pay attention to the safety precautions and conditions. Refer to => [ Safety Precautions and Conditions for Removing and Installing Tires and Wheels with Tire Pressure Monitoring System ] Service Precautions.

- Remove the nickel plated valve insert and let the air out of the tire.

- When pressing off tire on a tire mounting device with press-off blade, always make sure that tire valve/tire pressure sensor - arrow - is located opposite the press-off blade - 1 -.






• Press-off blade must be applied at maximum 2 cm removed from rim flange.

- Remove the balance weight and any dirt from the disc wheel.

- Press off both tire beads around circumference while thoroughly applying tire mounting paste between tire and rim flange - arrow -.