Removal and Replacement

Fuel Level Sensor (G)

Removing

- Read the safety precautions before starting. Refer to => [ Safety Precautions ] Fuel Supply.

- Pay attention to the rules of cleanliness. Refer to => [ Clean Working Conditions ] Fuel Supply.

- Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.

- Pull the fuel level sensor slightly to the side and upward at the same time.






- If the sensor cannot be released this way, press the retaining tabs - arrows - to the side slightly.






- Note the color of the wires for reinstalling later.






- Disconnect the wire connectors - 1 through 3 -. Bend the hooks back.

Installing

- Connect the wire connectors - 1 through 3 -. Pay attention to the color.






- Pull on the connectors to make sure they are secure.

- Insert the fuel level sensor into the guide on the fuel delivery unit and push it downward until it clicks into place.

- Install the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.