Dimmer Switch: Service and Repair

Instrument Panel and Switch Illumination Dimmer Switch (E20)


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( Trim Removal Wedge (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

Check the instrument panel and switch illumination dimmer switch using the (Vehicle diagnostic tester) before removing it.

- Remove the Light Switch (E1). Refer to => [ Light Switch ] Light Switch (E1).

- Remove the driver side instrument panel cover.

- Disconnect the connector - arrow -.






- Open the tabs - arrows - and remove the instrument panel and switch illumination dimmer switch.






Installing

Install in reverse order of removal.