Instrument Cluster / Carrier: Testing and Inspection

Instrument Cluster Replacing

Special tools, testers and auxiliary items required

• Vehicle diagnostic tester

Work procedure "replace instrument cluster" contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the Instrument Cluster Control Module (J285) must be set for the various equipment characteristics, coding and service data.

• To adapt the integrated Anti-Theft Immobilize Control Module (J362) with the Engine Control Module (J623) (ECM), it is necessary to save the data from the ECM in the replacement instrument cluster.

• Also, all ignition keys must be adapted after installation of a new instrument cluster.

The procedure to "replace the instrument cluster" can only be performed using the Vehicle diagnostic tester in the "guided fault finding" function.

Procedure

- Connect the Vehicle diagnostic tester.

- Select Guided Fault Finding.

- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• 17 - Instrument cluster

• Instrument cluster functions

• Instrument cluster replacing