Door Lock Reminder Light: Service and Repair

Central Locking -SAFE- Indicator Lamp (K133)

The central locking -SAFE- indicator lamp is installed near the exterior mirror in the driver door trim panel.


• Switch off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool such as ( trim removal wedge (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove the driver side door trim panel.

- Press the tabs - arrows - and remove the central locking -SAFE- indicator lamp - 1 - from the door trim panel.






- Disconnect the connector - 1 - and central locking -SAFE- indicator lamp - 2 -.






Installing

Install in reverse order of removal. Note the following:

- Make sure the central locking -SAFE- indicator lamp engages in the door trim securely.