Diagram 67/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


A/C control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E159 - Fresh air/recirculation door switch Climatic (Manual Climate Control) / Heater Overview

G263 - Evaporator vent temperature sensor Climatic (Manual Climate Control) / Heater Overview Evaporator Vent Temperature Sensor -G263-

G267 - Temperature selector knob potentiometer

J301 - A/C control module Overview Of Control Modules Climatic (Manual Climate Control) / Heater Overview A/C Control Module -J301-

K10 - Rear window defogger indicator lamp

K114 - Fresh air and recirculation mode indicator lamp

T6k - 6-pin connector

T10a - 10-pin connector, on the heater Overview Of Connector Stations and Connectors

T16e - 16-pin connector

T20c - 20-pin connector

V113 - Recirculation door motor Climatic (Manual Climate Control) / Heater Overview [1][2]Air Door Actuator / Motor, HVAC

(43) - Ground connection on A-pillar, lower right Locations

(366) - Ground connection 1 (in main wiring harness)

(388) - Ground connection 23 (in main wiring harness)

Previous Diagram 67/2 (Tracks 1-14)

Next Diagram 67/4 (Tracks 29-42)