Diagram 50/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Clutch position sensor, Engine control module, Leak detection pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G476 - Clutch position sensor Locations Diagrams

J104 - ABS control module Overview Of Control Modules [1][2]Diagrams

J519 - Vehicle electrical system control module Overview Of Control Modules

J623 - Engine control module Overview Of Control Modules

T4dp - 4-pin connector

T5m - 5-pin connector

T47a - 47-pin connector

T52c - 52-pin connector Overview Of Control Modules

T94 - 94-pin connector

V144 - Leak detection pump Locations [1][2]Diagrams

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Only for vehicles with a manual transmission

*2 - Only for vehicles with ABS and ESP

*3 - Running change

*4 - Depending on equipment

Previous Diagram 50/15 (Tracks 183-196)

Next Diagram 50/17 (Tracks 211-224)