Diagram 58/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Mirror adjusting switch, Mirror selector switch, Exterior rearview mirror heating switch, Mirror folding switch, Driver door control module, Vehicle electrical system control module, Mirror adjustment switch illumination bulb





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E43 - Mirror adjusting switch [1][2]Diagrams

E48 - Mirror selector switch [1][2]Diagrams

E231 - Exterior rearview mirror heating switch [1][2]Diagrams

E263 - Mirror folding switch [1][2]Diagrams

J386 - Driver door control module Overview Of Control Modules Locations Driver/Front Pass Door Control Module -J386- / -J387-

J519 - Vehicle electrical system control module Overview Of Control Modules

L78 - Mirror adjustment switch illumination bulb

T10p - 10-pin connector

T16a - 16-pin connector

T28 - 28-pin connector, Left A-pillar, bottom Overview Of Connector Stations and Connectors

T32f - 32-pin connector, Left A-pillar, bottom Overview Of Connector Stations and Connectors

T73b - 73-pin connector Overview Of Control Modules

(205) - Ground connection (in driver door wiring harness)

(B231) - Positive connection 5 (30a) (in interior wiring harness)

(Q38) - Positive connection 1 (publication) (in power window wiring harness)

(Z1) - Connection 1 (in power heated mirror wiring harness)

* - Depending on equipment

Previous Diagram 58/5 (Tracks 43-56)

Next Diagram 58/7 (Tracks 71-84)