Diagram 23/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Parking brake indicator lamp switch, Brake fluid level warning switch, Left front brake pad wear sensor, Warning buzzer and tone, Instrument cluster control module, ABS indicator lamp, Brake system indicator lamp, ASR/ESP indicator lamp, Tire pressure monitoring display indicator lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F9 - Parking brake indicator lamp switch

F34 - Brake fluid level warning switch Locations

G34 - Left front brake pad wear sensor

H3 - Warning buzzer and tone

J285 - Instrument cluster control module Overview Of Control Modules

K47 - ABS indicator lamp Locations

K118 - Brake system indicator lamp Locations

K155 - ASR/ESP indicator lamp Locations

K220 - Tire pressure monitoring display indicator lamp

T2ap - Double connector

T2bb - Double connector

T2w - Double connector

T32 - 32-pin connector

(132) - Ground connection 3 (in engine compartment wiring harness)

(376) - Ground connection 11 (in main wiring harness)

(655) - Ground connection on left headlamp Locations

(B379) - Brake wear indicator connection 1 (in main wiring harness)

(B380) - Brake wear indicator connection 2 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

* - Depending on equipment

*2 - only for vehicles with High equipment (AW1)

*3 - Only for vehicles with brake pad wear indicator

*4 - only for vehicles with Low equipment (AW0)

Previous Diagram 23/6 (Tracks 57-70)