Service Position, Resetting

Service Position, Resetting






Perform the following:

- Push the lock carrier and its attachments - 1 - onto the guide rods (T10093) on the longitudinal member.

- Install the bolts - 3 - and - 4 -.

- Align the lock carrier and its attachments - 1 - on the longitudinal members and between the fenders.

Bolt - 3 - tightening specification: 8 Nm

Bolt - 4 - tightening specification: 60 Nm

Install in reverse order of removal.

• Make sure the charge air cooler pressure hoses are secure. Refer to => [ Pressure Hoses ] Pressure Hoses.

• Hoses and lines must not be pinched.