Lock Carrier Attachments Assembly Overview

Lock Carrier Attachments Assembly Overview






1 Lock carrier with attachments

• Removing and Installing, refer to => [ Lock Carrier with Attachments ] Lock Carrier with Attachments

2 Air guide channel

3 Bolt

• Quantity: 2

• Tightening specification: 2 Nm

4 Bolt

• 3 on each side

• Tightening specification: 8 Nm

5 Angle bracket

• Left

6 Air duct

• Left

7 Bolt

• 2 on each side

• Tightening specification: 8 Nm

• For attaching the bumper carrier - 9 - to the lock carrier - 1 -

8 Bolt

• Quantity: 3, on the left side

• Quantity: 4, on the right side

• Tightening specification: 60 Nm

9 Bumper carrier

10 Nut

• Quantity: 2

• Tightening specification: 18 Nm

• For attaching the lock carrier support - 15 - to the bumper carrier - 9 -

11 Bolt

• Quantity: 3

• Tightening specification: 8 Nm

12 Center guide

• Guide for the front bumper cover

13 Air duct

• Right

14 Bolt

• Quantity: 2

• Tightening specification: 12 Nm

• For attaching the lock carrier support to the lock carrier and hood latch

15 Support

16 Angle bracket

• Right