Lower A-pillar Trim, Driver Side

Lower A-pillar Trim, Driver Side

Removing

- Remove the sill panel strip from the body in the transition area to the lower A-pillar trim. Refer to => [ Sill Panel Trim ] Service and Repair.

- Remove the instrument panel cover on each side. Refer to => [ Side Instrument Panel Covers ] Side Instrument Panel Covers.

- Remove the A-pillar center trim. Refer to => [ Center A-Pillar Trim ] Center A-Pillar Trim.

- Remove the hood release lever - 3 -.

- Remove clip - 2 -.

- Loosen the trim - 1 - from the body in - direction of arrow B -. Loosen the trim from the door seal molding.

- Remove the trim - 1 - from the mount - direction of arrow A -.






Installation

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.

• Make sure the trim panel is installed inside the door seal.