Center A-Pillar Trim

Center A-Pillar Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

Perform the following:

- Remove the instrument panel cover on each side. Refer to => [ Side Instrument Panel Covers ] Side Instrument Panel Covers.

- Loosen the trim - 2 - from the door seal molding.

- Loosen the clip - 1 - with the trim removal wedge (3409).

- Remove the trim - 2 - from the A-pillar lower trim - 3 - in - direction of arrow -.






Installation

Perform the following:

- Install in reverse order of removal.

• Check all the fasteners for damage and replace if necessary.

• Make sure the trim panel is installed inside the door seal.