Diagram 69/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module, Data bus on board diagnostic interface, Amplifier, Left rear bass speaker, Right rear bass speaker, Subwoofer





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle electrical system control module Overview Of Control Modules

J533 - Data bus on board diagnostic interface Overview Of Control Modules

R12 - Amplifier Locations Component Locations Component Locations Locations Overview Of Control Modules

R15 - Left rear bass speaker Locations

R17 - Right rear bass speaker Locations

R211 - Subwoofer

T4bb - 4-pin connector

T20 - 20-pin connector

T28b - 28-pin connector, on the left B-pillar Overview Of Connector Stations and Connectors

T28c - 28-pin connector, on the right B-pillar Overview Of Connector Stations and Connectors

T38 - 38-pin connector

T73b - 73-pin connector Overview Of Control Modules

(A178) - Infotainment CAN bus high connection (in instrument panel wiring harness)

(A179) - Infotainment CAN bus low connection (in instrument panel wiring harness)

(A225) - Infotainment CAN bus high connection 2 (in instrument panel wiring harness)

(A226) - Infotainment CAN bus low connection 2 (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - only for vehicles with High equipment (AW1)

*2 - only for vehicles with Low equipment (AW0)

Previous Diagram 69/4 (Tracks 29-42)