Steering Column Switch Overview, from 06.10
Steering Column Switch Overview, from 06.10
There are different versions of the steering column electronic systems control module (J527) / steering column combination switch (E595) and the steering column switch base carrier depending on the manufacturer (Valeo or Kostal). The Valeo version is shown in the illustration.
1 Steering Column Electronic Systems Control Module (J527)
• Observe removal and installation sequence. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removal and installation, refer to => [ Steering Column Electronic Systems Control Module (J527) ] Steering Column Electronic Systems Control Module (J527).
• Coding, refer to=> [ Steering Column Electronic Systems Control Module (J527), Coding ] Steering Column Electronic Systems Control Module (J527), Coding.
• Output Diagnostic Test Mode (DTM), refer to => [ Steering Column Electronic Systems Control Module (J527) Output Diagnostic Test Mode (DTM) ] Steering Column Electronic Systems Control Module (J527) Output Diagnostic Test Mode (DTM)
• Mounting bolt tightening specification: 1.5 Nm
2 Steering Column Combination Switch (E595)
• Observe removal and installation sequence. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removal and installation, refer to => [ Steering Column Combination Switch (E595) ] Steering Column Combination Switch (E595).
3 Base Carrier For Steering Column Switches
• Observe removal and installation sequence. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removal and installation, refer to => [ Steering Column Switch Base Carrier, Valeo ] Steering Column Switch Base Carrier, Valeo or => [ Steering Column Switch Base Carrier, Kostal ] Steering Column Switch Base Carrier, Kostal.
4 Shear Bolts
• Break-off torque: approximately 15 Nm
5 Steering Lock Housing
The steering lock housing must be remove and installed together with the steering column switch base carrier.
• Observe removal and installation sequence. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removal and installation, refer to => [ Steering Column Switch Base Carrier, Valeo ] Steering Column Switch Base Carrier, Valeo or => [ Steering Column Switch Base Carrier, Kostal ] Steering Column Switch Base Carrier, Kostal.
6 Ignition Switch and Lock Cylinder
• Removal and installation, refer to => [ Ignition Switch ] Ignition Switch.