Direct Shift Gearbox 02E (DSG)

Control modules in engine compartment

Direct Shift Gearbox 02E (DSG)







DSG transmission Mechatronic -J743-
Component Location:
In the DSG transmission


Connector assignment, only on the 2.0L CCZA







A - DSG transmission Mechatronic -J743-
Pin Arrangements:

B - 20-pin connector -T20e- on the wiring harness

C - 4-pin connector -T4z- on the wiring harness

D - Transmission input speed sensor -G182- and clutch temperature sensor -G509- (assembly)



20-pin connector assignment







A - DSG transmission Mechatronic -J743-
Connector:

B - 20-pin connector -T20e- on the wiring harness

1 - K-Wire

2 - Not used

3 - Not used

4 - Not used

5 - Not used

6 - Not used

7 - Not used

8 - Not used

9 - Not used

10 - CAN H

11 - Supply, terminal 30

12 - Not used

13 - Supply, terminal 15

14 - Not used

15 - CAN L

16 - Ground (terminal 31)

17 - Starter lock (output to vehicle electrical system control module)

18 - Supply, terminal 30

19 - Ground (terminal 31)

20 - Not used

C - 4-pin connector -T4z- on the wiring harness

1 - Transmission input temperature(0), temperature signal

2 - Input speed sensor (+), supply

3 - Input speed sensor (0), speed signal

4 - Input speed sensor (-), ground