Steering Column Combination Switch (E595), Kostal

Steering Column Combination Switch (E595), Kostal


The removal and installation of individual steering column switch components must be done in a specified sequence => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.


• Risk of airbag deployment!

• The airbag unit could deploy if mishandled.

• Follow the safety precautions when working on the airbag.


Always follow the instructions regarding disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Removal

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronic systems control module (J527).






- Remove the screw - arrow - and remove the complete steering column combination switch (E595) - 1 - from the steering column switch base carrier.

Installation

- Slide the steering column combination switch into the slide on the steering column switch base carrier.

- Install the screw - arrow -.






- Connect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Further installation is in the reverse sequence to removal.