Steering Control Module: Locations

Control modules in engine compartment

Power steering control module -J500-




Connector assignment, for MY 10 only


^ Only for MY 10





A - Power steering control module -J500-
Pin Arrangements:

B - 2-pin connector -T2 l- on the wiring harness

C - 5-pin connector -T5h- on the wiring harness

D - 5-pin connector -T5g- on wiring harness

E - Steering torque sensor -G269-
Component Location:
Communicated directly to the steering pinion



Connector, - for MY 10 only


^ Only for MY 10





C - 5-pin connector -T5h- on the wiring harness

1 - CAN L

2 - CAN H

3 - Not used

4 - Supply, terminal 15

5 - Not used

D - 5-pin connector -T5g- on wiring harness

1 - Not used

2 - Terminal 31 (ground A)

3 - Terminal 31 (ground B)

4 - Signal A (PAS_A)

5 - Signal B (PAS_B)



Connector assignment from MY 11


^ From MY 11





A - Power steering control module -J500-
Pin Arrangements:

B - 2-pin connector -T2 l- on the wiring harness

C - 3-pin connector -T3ao- on the wiring harness

D - 5-pin connector -T5g- on wiring harness

E - Steering torque sensor -G269-
Component Location:
In the power steering gear



Connector, - from MY 11


^ From MY 11





A - Power steering control module -J500-
Connector:

B - 2-pin connector -T2 l- on the wiring harness

1 - Ground (terminal 31)

2 - Supply, terminal 30

C - 3-pin connector -T3ao- on the wiring harness

1 - CAN L

2 - CAN H

3 - Supply, terminal 30

D - 5-pin connector -T5g- on wiring harness

1 - Signal B (PAS_B)

2 - Terminal 31 (ground B)

3 - Not used

4 - Signal A (PAS_A)

5 - Terminal 31 (ground A)