Component Tests and General Diagnostics

Electronic Steering Column Lock Control Module (J764), Replacing

The procedure for "replacing the electronic steering column lock control module" includes the following steps:

• If a new electronic steering column lock control module is installed in the vehicle, then it must be coded.

• Then the electronic steering column lock control module must be adapted.

The procedure to "replace the electronic steering column lock control module" can only be performed with the Vehicle diagnostic tester in the "guided fault finding" function.

Procedure

- Connect the -> Vehicle diagnostic tester.

- Select Guided Fault Finding.

- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• 2B - Electronics steering column adjustment

• Functions

• Replace the electronic steering column lock control module