High Beam Headlamp and Daytime Running Lamp Bulbs

High Beam Headlamp and Daytime Running Lamp Bulbs

• The left high beam headlamp bulb (M30) and the right high beam headlamp bulb (M32) is a two-filament bulb and functions also as the left daytime running lamp (L174) and the right daytime running lamp (L175).

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The following illustrations show replacing a bulb in a left headlamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the cap - 1 -.






- Turn the bulb socket - 1 - in - direction of arrow - and remove it together with the left high beam headlamp bulb (M30) / left daytime running lamp bulb (L174) from the headlamp.






• The left high beam headlamp bulb/left daytime running lamp bulb is connected to the socket and cannot be disassembled.

Bulb: 12 V 15/55 W

Installation


• Do not touch the glass of the light bulb, when installing. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

Installation is performed in the reverse order of removal. Note the following:

- Check headlamp for functions.

- Check and adjust the headlamp adjustment.