Parking Brake Lever: Service and Repair

Parking Brake Lever Assembly Overview






1 Parking Brake Lever

• Remove center console before removing.

2 Nut, 20 Nm

3 Trim for Parking Brake Lever

• Pull off forward.

• Pry off release tab in rear bottom handle area - arrow - with a screwdriver.

• With a leather version, leather in catch area is cut.

4 Relay Rod

5 Compensator Bracket

6 Adjustment Nut

• Adjusting parking brake, refer to => [ Parking Brake, Adjusting ] Adjustments.

7 Parking Brake Switch

8 Parking Brake Cables

• Removal and installation, refer to => [ Parking Brake Cable ] Service and Repair.