Front Brake Caliper FS III Assembly Overview

Front Brake Caliper FS III Assembly Overview

• Install complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply thin coat of assembly paste (G 052 150 A2) to brake cylinders, pistons and seals.





1 - Dust Cap

• Install onto bleeder valve.

2 - Bleeder Valve, 10 Nm

• Apply a thin coat of assembly paste (G 052 150 A2) to the threads before screwing in.

3 - Caps

• Insert in bushing.

4 - Guide Pins, 30 Nm

5 - Bushing

• Insert in brake caliper.

6 - Brake Caliper

7 - Protective Cap

• Removal and installation, refer to => [ FS III Brake Caliper Piston ] FS III Brake Caliper Piston.

• Do not damage when installing piston.

8 - Pistons

• Removal and installation, refer to => [ FS III Brake Caliper Piston ] FS III Brake Caliper Piston.

• First apply thin coat of assembly paste (G 052 150 A2) on piston.

9 - Seal

• Removal and installation, refer to => [ FS III Brake Caliper Piston ] FS III Brake Caliper Piston.