Front Brake Caliper FN 3 Assembly Overview

Front Brake Caliper FN 3 Assembly Overview

• Install complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply thin coat of assembly paste (G 052 150 A2) to brake cylinders, pistons and seals.





1 - Dust Cap

• Install onto bleeder valve.

2 - Bleeder Valve, 10 Nm

• Apply a thin coat of assembly paste (G 052 150 A2) to the threads before screwing in.

3 - Caps

• Insert in bushing.

4 - Guide Pins, 30 Nm

5 - Bushing

• Insert in brake caliper.

6 - Brake Caliper

7 - Brake Carrier

• Bolt to brake caliper.

8 - Retaining Spring

• Insert with both ends in holes of brake caliper.

9 - Seal

• Removal and installation, refer to => [ FN 3 Brake Caliper Piston ] FN 3 Brake Caliper Piston.

10 - Pistons

• Removal and installation, refer to => [ FN 3 Brake Caliper Piston ] FN 3 Brake Caliper Piston.

• First apply thin coat of assembly paste (G 052 150 A2) on piston.

11 - Protective cap

• Removal and installation, refer to => [ FN 3 Brake Caliper Piston ] FN 3 Brake Caliper Piston.

• Do not damage when installing piston.