Subframe Mounting Bracket

Subframe Mounting Bracket

CAUTION!
Observe safety precautions!

Special tools, testers and auxiliary items required

• Spot welder (Inverter) (VAS 6239)

• Spot welder (Inverter) (VAS 6249)

• Welding unit with C-grips (VAS 6366)

• Welding unit with X-grips (VAS 6376)

• Programmable welding unit with C-grips (VAS 6377)

• MIG soldering and welding units (VAS 6382)

• MIG soldering and welding units (VAS 6390)

• In the example, replacement of retaining bracket for subframe is described for left front retaining bracket on this vehicle. The work procedure is performed in a similar manner for the other 3 retaining brackets.

CAUTION!
When using different types of steel and materials of different strengths, one of the inverters listed under Special Tools are required to perform repair work correctly. Refer to=> [ Special Tools ] .

Preparing New Parts

Replacement part

• Front retaining bracket for subframe (replacement part identification: retaining bracket mounting frame)

- Drill holes for gas-shielded arc plug weld seam 8 mm dia..





Removing





- Separate the original connection.

- Remove residual material.