Subframe Bracket

Subframe Bracket

Observe safety precautions.

• In the example, replacement of retaining bracket for subframe is described for left front retaining bracket on this vehicle. The work procedure is performed in a similar manner for the other 3 retaining brackets.

• Due to the different types of steel and material strength, use only welding equipment approved by Volkswagen AG to perform any service work.

• For a list of welding equipment and body tools approved by Volkswagen AG, refer to ServiceNet.

Removing






- Separate the original connection.

- Remove residual material.






Installing

• Use only welding equipment approved by Volkswagen AG. Refer to ServiceNet.

Preparing New Parts

Replacement part

• Front retaining bracket for subframe (replacement part identification: retaining bracket mounting frame)

- Drill 8 mm holes for a gas shielded arc plug weld seam.






Welding

- Fit new part to vehicle standing on alignment bracket set and secure.






- Weld in new part; Gas-shielded arc plug weld seam.