Firewall: Service and Repair

Cross Panel

• Cross panel - 1 - is bolted and also bonded in with PUR adhesive sealing material - 3 -.






1 Cross panel

• Removal:

- Cut through the bead of adhesive - 3 - after removing the screws - 2 -.

2 Body flange

3 PUR adhesive sealant

• DH 009 100 03

• Bead cross section: Width = 8 mm height = 10 mm

• Minimum curing time, refer to=> [ Minimum Curing Time ] Minimum Curing Time

4 Bolt

• Quantity: 10

• Tightening specification: 25 Nm