Front Wheel Housing Liner Assembly Overview

Front Wheel Housing Liner Assembly Overview

• The following describes removing and installing the left wheel housing liner. Removing and installing the right wheel housing liner is identical.

• Due to equipment variations, small deviations must be considered during removal and installation.

• The illustration shows a left fender. The right fender is identical.






1 Rear part of wheel housing liner

• PP/EPDM material

• Removing, refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner

2 Bolt

• Quantity: 7

• Tightening specification: 2 Nm

3 Front part of wheel housing liner

• Material - PP/EPDM

4 Bolt

• Quantity: 6

• Tightening specification: 2 Nm

5 Expanding nut

• Quantity: 7