Front

License Plate Holder

• The license plate holder can have different sizes depending on the market.

• The contour of the bumper determines the height of the license plate holder.

• Drill 12 mm holes.






With holes present

- Position the license plate holder - 1 - on the radiator grille and press the clips - 2 - in.

With no holes present

- Align the license plate holder - 2 - on the bumper - 1 - with the emblem - 4 -.

- Set the drill stop depth to 12 mm and drill the holes.

- Position the license plate holder - 2 - on the radiator grille and press the clips - 3 - in.