Front Bumper Cover Assembly Overview

Front Bumper Cover Assembly Overview

• Slight changes may have to be made to removal and installation procedures of front bumper cover, depending upon equipment installed in vehicle.






1 Front bumper cover

• PP/EPDM material

• Removing, refer to=> [ Front Bumper Cover ] Front Bumper Cover

2 Bolt

• Quantity: 2

• Tightening specification: 2 Nm

• Attached to the lock carrier

3 Bolt

• Left and right

• Pointing upward

• Tightening specification: 2 Nm

4 Bolt

• 4 pieces per side

• Tightening specification: 2 Nm

• Attached to the wheel housing liner

5 Side marker lights

• Left and right

• Not for all countries

6 Bolt

• 2 pieces per side

• Tightening specification: 2 Nm

• Attached to the wheel housing liner

7 Bolt

• Quantity: 4

• Tightening specification: 1.5 Nm

• Attached to the lock carrier