Clutch Overview, Sachs

Clutch Overview, Sachs






1 Dual Mass Flywheel

• Make sure it fits securely on the centering pins

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch plate

• Allocation, refer to the Parts Catalog

• Only replace together with the pressure plate

• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs

• Installed position, refer to => [ Clutch Plate Installed Position ] Clutch, Sachs

3 Pressure Plate

• With adjustment mechanism

• Allocation, refer to the Parts Catalog

• Only replace together with the clutch plate

• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs

• Check the ends of the diaphragm spring, refer to => [ Check the Ends of the Diaphragm Spring ] Clutch, Sachs

• Checking the spring connections and rivet connections, refer to => [ Checking the spring Connections and
Rivet Connections ] Clutch, Sachs

4 Bolt

• M6: 13 Nm

• M7: 20 Nm

• Allocation, refer to the Parts Catalog

• Loosen and tighten in small steps and in diagonal sequence