Clutch Overview, LuK

Clutch Overview, LuK






1 Dual Mass Flywheel

• Make sure it fits securely on the centering pins

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch Plate

• Allocation, refer to the Parts Catalog

• Removing and installing, refer to => [ Clutch, LuK ] Clutch, LuK.

• Only replace together with the SAC pressure plate

• Installed position, refer to => [ Clutch Plate Installed Position ] Clutch, LuK

3 SAC Pressure Plate

• SAC = "Self Adjusting Clutch"

• Only replace together with the clutch plate

• Allocation, refer to the Parts Catalog

• Removing and installing, refer to => [ Clutch, LuK ] Clutch, LuK

• Check the ends of the diaphragm spring, refer to => [ Check the Ends of the Diaphragm Spring ] Clutch, LuK

• Checking the spring connections and rivet connections, refer to => [ Checking the Spring Connections and
Rivet Connections ] Clutch, LuK

4 Bolt

• M6: 13 Nm

• M7: 20 Nm

• Loosen and tighten in small steps and in diagonal sequence