After an Accident With Belt Tensioner and/or Airbag Deployment

After an Accident with Belt Tensioner and/or Airbag Deployment

• Each time passenger airbag and/or belt pretensioner on passenger side is deployed, Seat Occupied Recognition Control Module (J706) basic setting must be performed. Perform the basic setting with a Vehicle Diagnosis Tester that has "Guided Fault Finding".

• If the seat rails and/or seat pan must be replaced after an accident due to deformation, seat occupied recognition must also be replaced with "seat occupied recognition repair kit". Then, Seat Occupied Recognition Control Module (J706) basic setting must be performed. Perform the basic setting with a Vehicle Diagnosis Tester that has "Guided Fault Finding".