Steering Column Combination Switch (E595), Kostal

Steering Column Combination Switch (E595), Kostal


Follow the specified sequence when removing and installing steering column switch components. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Removing

- Remove the steering wheel.

- Remove the steering column trim.

- Remove Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module (J527), Kostal ] Steering Column Electronic Systems Control Module (J527), Kostal.






- Remove the bolt - arrow - and remove the entire steering column combination switch - 1 - from the steering column switch base carrier.

Installation

- Slide the steering column combination switch onto the guides on the steering column switch base carrier.

- Install the bolt - arrow -.

- Install all components in reverse order of removal.