Crankshaft Gear/Sprocket: Service and Repair

Crankshaft Sensor Wheel

- Always replace the sensor wheel - 2 - each time the screws - 1 - are removed.






• After tightening a second time, the attachment point of the countersunk screws of the sensor wheel are so deformed that the screw heads - 3 - lie on the crankshaft - arrows - and the sensor wheel is loose underneath the screws.

• The sensor wheel can only be installed in one position. The holes are offset.

• Tightening specification, refer to => [ Crankshaft Overview ] Service and Repair.