Engine Controls - ECM Update for MIL ON, DTC P240F Set

01 13 07

February 26, 2013

2032871





Vehicle Information

Condition

Update Programming - MIL ON, DTC P240F Stored in ECM Fault Memory





The fault codes may be stored in the ECM Fault Memory:

Technical Background

Diagnostic strategy too sensitive.

Production Solution

Improved ECM software to address MIL ON complaints.

Service

Update-Programming Procedure:

Tip:
To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".

The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.





Note:





^ Update the Engine Control Module using the SVM Unit code as listed in the table.

The procedure can be found in GFF under Functions/Component Selection, Software Version Management, Adapting Software.





WARNING and Tip








Warranty





Required Parts and Tools

No Special Parts required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.





Owner Information About Control Module Tuning