Diagram 7/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Safety Belt Tensioner, Safety Belt Switch, Front Passenger's Seat Occupied Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch Passive Occupant Detection System

G128 - Front Passenger's Seat Occupied Sensor Passive Occupant Detection System

J234 - Airbag Control Module, behind lower console Control modules in front part of vehicle - Overview of Control Modules

J519 - Vehicle Electrical System Control Module Control modules in front part of vehicle - Overview of Control Modules

N153 - Driver's Safety Belt Tensioner Igniter 1 Locations

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Locations

T2q - Double Connector, below driver's seat Overview of connector stations and connectors

T2y - Double Connector, below front passenger's seat Overview of connector stations and connectors

T50 - 50-Pin Connector

*** - Only models with front passenger's seat occupied sensor / safety belt switch

--- - Only models with front passenger's seat occupied sensor

-^- - Only models without front passenger's seat occupied sensor

Previous Diagram 7/5 (Tracks 43-56)

Next Diagram 7/7 (Tracks 71-84)