Underbody Impact Guard Overview

Underbody Impact Guard Overview

• Slight changes may have to be made to removal and installation procedures, depending upon engine installed in vehicle.






1 Underbody Impact Guard

• Removing:

- Remove the bolts - 9 and 10 -.

2 Right Side Angle Bracket

• The shape may be different depending on the engine versions

3 Hex Nut

• Tightening specification: 20 Nm

• 1 piece only for the right bracket

4 Threaded Rivet

5 Bolt

• Tightening specification: 35 Nm

• 1 piece only for the right bracket

• 2 pieces for the left bracket

6 Left Side Angle Bracket

• The shape may be different depending on the engine versions

7 Rear Retaining Strip

8 Bolt

• Tightening specification: 70 Nm

• Quantity: 2

9 Bolt

• Tightening specification: 2 Nm

• Quantity: 8

10 Bolt

• Tightening specification: 20 Nm

• Quantity: 6