Steering Column Combination Switch (E595), Kostal

Steering Column Combination Switch (E595), Kostal

Follow the specified sequence when removing and installing steering column switch components. Refer to=> [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Removal

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronics control module (J527). Refer to=> [ Steering Column Electronic Control Module (J527) ] Steering Column Electronic Control Module (J527).






- Unscrew the mounting bolt - arrow - and remove the complete steering column combination switch (E595) - 1 - straight back from the steering column switch base carrier.

Installation

- Slide the steering column combination switch straight onto the guides on the steering column switch base carrier.

- Install the mounting bolt - arrow -.

- Reinstall all components accordingly in the reverse order.