License Plate Lamp Bulb

License Plate Lamp Bulb

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the license plate lamp. Refer to => [ License Plate Lamp Attached by Clips ] License Plate Lamp Attached by Clips.

- Turn the lamp socket - 1 - in the - direction of the arrow - to release it and pull it out of the license plate lamp.






Bulb for license plate lamp with clips: Wedge-base bulb 12V, W5W

Installation

Installation is performed in the reverse order of removal.

- After installation, check the function of the license plate lamp.