Headlamp Range Control Adjuster (E102) and Instrument Panel Dimmer Switch (E20)

Headlamp Range Control Adjuster (E102) and Instrument Panel Dimmer Switch (E20)

• The headlamp range control adjuster and the instrument panel and switch illumination dimmer switch form a single component.

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the headlamp switch. Refer to => [ Light Switch (E1) ] Light Switch (E1).

- Remove the storage compartment on the driver side.

- Disconnect the connector - arrow -.






- Release the retaining tabs - arrows - and pull out the adjuster and regulator.






Installation

Installation is performed in the reverse order of removal.