Climatronic Control Module, From 08 November 2010

Climatronic Control Module, From 08 November 2010

• Not all the buttons are used, depending on the vehicle equipment level.






1 Max Defrost button

• The control module will be activated in such a way so that the windshield will defrost quickly when the Max Defrost button is pushed.

2 AUTO Button

• In automatic mode the Climatronic maintains the selected vehicle temperature automatically. The air temperature, the blower speed and the air distribution are adjusted automatically.

• LED is on when the setting is active.

• Pressing the button several times increases the blower speed when using AUTO. The second LED turns on.

3 Windshield Air Distribution Button

• LED is on when the setting is active.

4 Heated Windshield Button

• LED is on when the setting is active.

5 Center Air Distribution Button

• LED is on when the setting is active.

6 Lower Air Distribution Button

• LED is on when the setting is active.

7 Immediate Heating Button (E537)

• LED is on when the setting is active.

8 Air Recirculation Button

• Press the button for recirculating air function to prevent polluted air from entering interior.

• Recirculating air is switched on automatically under the following conditions:

• When the windshield washer system is operated.

• When Air quality sensor (G238) is activated.

• When the reverse gear is engaged (this function is only active for 2 minutes after the engine is started).

• Blower speeds on Front A/C display control head (E87).

• Front A/C display control head (E87) "OFF"

9 AC Button

• If the AC button is deactivated, the A/C compressor is set to almost zero delivery. If the AUTO button is activated, the heating and ventilation mode continues to be controlled electronically.

10 Rear Window Defogger Button

• Rear window defroster remains on for 4 to 20 minutes, depending on exterior temperature.

• LED is on when the setting is active.

11 Right Temperature Control Knob

• The selected temperature will be illuminated.

12 Button For The Right Seat Heating

• The seat heating as 3 settings. An LED indicates which setting is selected.

• If no LED is illuminated, the seat heater is switched off.

13 Air Conditioning Synchronization Button

• This button transfers all driver air conditioning settings to the other seats.

14 Button For Increasing The Blower Speed

15 REST Button

• When residual heat function is switched on the residual heat of engine is pumped by a coolant pump to the heater core.

16 Blower Speed Display

• The selected speed is illuminated.

• In automatic operation the actual blower speed is displayed.

17 REAR Button

• Press the REAR button to set the Rear A/C display control head (E265).

18 Button For Decrease The Blower Speed

19 OFF Button

• Press the OFF button to turn off the heater and A/C.

20 Left Temperature Control Knob

• The selected temperature will be illuminated.

21 Button For Left Seat Heating

• The seat heating as 3 settings. An LED indicates which setting is selected.

• If no LED is illuminated, the seat heater is switched off.