Engine Oil: Description and Operation

Engine Oil

Oil System Capacity

For the correct engine oil and specification, refer to the Fluid Capacity Tables.

Changing the oil.

Checking the Oil Level

• The oil level must not exceed the MAX mark - danger of damaging the catalytic converter!

Conditions

• The engine oil temperature is a minimum of 60 °C (140 °F).

• The vehicle is on level ground.

• After turning off the engine, wait a few minutes to allow the oil to drain back into the oil pan.

Sequence

- Pull out the oil dipstick, wipe it off with a clean cloth and reinsert it all the way into the guide tube.

- Pull out the oil dipstick again and check the oil level.

Range of marks on the dipstick:






a Oil must not be added.
b Oil may be filled.
c Oil must be added.

• The oil level must not exceed the MAX. mark - arrow 1 - and must not fall short of the MIN. mark - arrow 2 -.