ABS Mark 60 (ABS, EDL, ASR and ESP), from Calendar Week 22.2008

Brake Lines from Brake Master Cylinder, Connecting to Hydraulic Unit

On the Brake Master Cylinder






A Primary piston circuit of master brake cylinder to hydraulic unit
Identification: 6.5 mm and tube fitting with M12 x 1 thread
B Secondary piston circuit of master brake cylinder to hydraulic unit
Identification: 6.5 mm and tube fitting with M12 x 1 thread
1 Hydraulic unit to front left brake caliper
3 Hydraulic control unit to rear right brake caliper
4 Hydraulic control unit to rear left brake caliper

On Hydraulic Unit:






A Hydraulic unit to primary piston circuit of master brake cylinder
Identification: 6.5 mm and tube fitting with M12 x 1 thread
B Hydraulic unit to master cylinder secondary piston circuit
Identification: 6.5 mm and tube fitting with M12 x 1 thread
1 Hydraulic unit to front left brake caliper
Identification: 5.25 mm diameter and tube fitting with M10 x 1 thread
2 Hydraulic unit to right front brake caliper
Identification: 5.25 mm and tube fitting with M12 x 1 thread
3 Hydraulic control unit to rear right brake caliper
Identification: 5.25 mm diameter and tube fitting with M10 x 1 thread
4 Hydraulic control unit to rear left brake caliper
Identification: 5.25 mm and tube fitting with M12 x 1 thread